Overview
Owatrol Compo-Clean is a water-based cleaner and degreaser specifically formulated for exterior composite wood surfaces.
This environmentally friendly solution is safe to use around plastic pool liners, stone, cement, and other nearby materials, ensuring no damage occurs. With its convenient ready-to-use formula, Compo-Clean can be effortlessly applied with a brush or roller, and its fast-acting properties mean it gets to work in as little as 5 minutes!
After application, simply rinse with water for a hassle-free cleaning experience. Suitable for both horizontal and vertical surfaces, Compo-Clean offers a versatile solution for maintaining the beauty of your composite wood.
- Water-based composite wood cleaner and degreaser
- Suitable for all types of exterior composite wood surfaces
- Environmentally friendly formula
| Area | Exterior |
| Recommended Use | All exterior composite wood surfaces |
| Base | Water-Based |
| Coverage | Up to 10m2 per litre |
| Application Method | Brush, Roller |
| Clean Up | Remove as much product as possible from the equipment before cleaning with water |
Preparation
Always test a small area first. Protect all areas not to be cleaned, plants, shrubs etc. including and especially aluminium parts. Always wear suitable protection – gloves (rubber/nitrile), goggles or visor, clothing.
Application
- First, apply a thick layer of Compo-Clean to the area to be cleaned. Large areas should be cleaned in smaller sections.
- Leave the product to work for 5 minutes (longer if necessary depending on the nature of the dirt and contamination) and then scrub with a stiff nylon or synthetic brush.
- Rinse with plenty of fresh clean water using the highest pressure source available or use a power washer.
- If required repeat the above procedure – for difficult or stubborn staining.
- Allow the surface to dry for 2-3 good drying days before applying a chosen finish./li>
Always follow manufacturer's instructions found on the tin
